Submersible Pump Price List 2026: HP-wise and Brand-wise Guide
Two 1.5 HP submersible pumps can differ in price by more than double. The difference lies in stages, motor type, build quality and what is included in the box. This guide sets out approximate 2026 prices by HP and brand tier — and the real cost of a complete borewell installation.
WHAT THIS GUIDE COVERS
- Submersible Pump Price by HP
- Brand-wise Price Bands
- What Makes Two Pumps of the Same HP Cost Different
- Single Phase vs Three Phase
- The Real Installed Cost of a Borewell Pump
- Prices, GST and Invoicing
- How to Choose the Right Pump
- Buying Checklist
⚠ PRICE NOTE — APPROXIMATE FIGURES ONLY
- All prices in this guide are approximate market ranges, inclusive of GST, for reference only.
- They are not actual selling prices and not a price offer or commitment from Headsup B2B.
- No claim can be made against Headsup B2B on the basis of these figures.
- Actual prices depend on brand, model, stages, accessories, quantity, location and date — request a written quote.
The submersible pump market spans everything from ₹5,000 online listings to six-figure agricultural and industrial sets. Most borewell buyers fall in the 1 HP to 3 HP range — and that is where price comparisons are most confusing.
The reason is simple. A pump listing shows a single price, but a working borewell needs a pump, a motor, cable, a control panel, column pipe and installation. The pump price is only the start of the bill.
1. Submersible Pump Price by HP
Horsepower sets the broad price band, but the spread within each band is wide. Value brands sold online sit at the bottom. Dealer-supplied V4 pumps from established manufacturing clusters sit in the middle. Premium national brands sit at the top.
| HP | Typical use | Approx. price range (incl. GST) | Price position |
|---|---|---|---|
| 1 HP | Homes, shallow to mid-depth borewells | ₹5,000 – 17,000 | Value brands at the lower end; dealer V4 pumps mid-range; premium brands near the top |
| 1.5 HP | Larger homes, deeper borewells, light irrigation | ₹6,000 – 15,000 | Kits with panel and cable cost more than pump-only listings |
| 2 HP | Deep borewells, multi-storey buildings, farms | ₹7,000 – 22,000 | Price rises with stages and depth rating |
| 3 HP | Deep bores, irrigation, small commercial | From approx. ₹17,000; higher for premium | Premium and three-phase models cost more |
| 5 HP | Agriculture, industrial, three-phase supply | Approx. ₹32,000 – 1,10,000 | Depends on depth, body material and stages |
For brand comparisons beyond price, see our guide to the top submersible pump brands in India.
2. Brand-wise Price Bands
Brand tier explains most of the gap between two pumps of the same HP. It reflects motor winding quality, impeller material, warranty terms and service network — not just the badge.
| Brand tier | Examples | Approx. position | Trade-off |
|---|---|---|---|
| Value / online | Jindal, Kisan, Balaji Prakash, Damor, PowerHouse | Lower band | Lowest upfront cost; check winding, warranty and service access |
| Regional manufacturers | V4 pump makers in clusters such as Coimbatore | Middle band | Good value; quality varies by maker |
| Premium national | CRI, Kirloskar, Texmo, Crompton, Lubi, Grundfos | Upper band | Higher price; stronger service networks and documentation |
3. What Makes Two Pumps of the Same HP Cost Different
Number of stages and head
Each stage adds lifting capacity. A 20-stage 1.5 HP pump lifts water higher than a 12-stage one — and costs more. Match stages to your borewell depth, not to the lowest price.
Oil-filled vs water-filled motor
Both are common. Water-filled motors are generally easier to rewind and service; oil-filled motors are often sold as lower-maintenance sealed units. Price differences between them are usually modest within a brand.
Copper winding
Pure copper winding handles heat better than aluminium. Listings that specify copper usually cost more.
Body and impeller material
Stainless steel bodies and better-grade impellers resist corrosion and sand. They add cost but extend life in hard or sandy water.
Bore size
V3, V4 and V6 refer to 3, 4 and 6-inch borewells. V4 is the most common for homes; larger bores need larger, costlier pumps.
What is included
Some prices include a control panel, 30–60 metres of cable and safety wire. Others are pump-only. Always compare like with like.
4. Single Phase vs Three Phase
| Factor | Single phase | Three phase |
|---|---|---|
| Typical HP range | Up to about 3 HP | 3 HP and above |
| Typical user | Homes, small buildings | Farms, industry, large buildings |
| Starting equipment | Control panel with capacitor | Starter panel |
| Price position | Lower | Higher, rising with HP and depth |
| Power supply needed | Standard domestic connection | Three-phase connection |
5. The Real Installed Cost of a Borewell Pump
A pump cannot run on its own. Cable, column pipe, panel and labour often cost more than the pump itself.
ILLUSTRATIVE INSTALLED COST (APPROX., INCL. GST) — 1.5 HP PUMP, 300 FT BOREWELL
| Variable | Assumption | Approx. installed cost | Impact |
|---|---|---|---|
| Shallower bore | 200 ft; 1.5 HP; ~70 m cable | ≈ ₹24,000 | ≈ ₹4,300 lower |
| ✓ Base case | 300 ft; 1.5 HP matched to head | ≈ ₹28,300 | Pump sized to depth |
| Deeper bore | 400 ft; 2 HP; ~130 m cable | ≈ ₹37,100 | ≈ ₹8,800 higher |
| Undersized pump | 300 ft with too few stages | Lower upfront | Low flow, overheating, early motor failure |
The cheapest pump is the one sized correctly for the bore. Everything else is a repair bill waiting to happen.— Headsup B2B Procurement Research, October 2026
6. Prices, GST and Invoicing
All prices in this guide are approximate and inclusive of GST. The final GST amount is shown separately on the supplier’s tax invoice. Businesses planning to claim input tax credit should check the invoice details with their CA.
Check that the invoice lists the pump model, HP, stages, serial number and warranty terms. These details matter for warranty claims.
7. How to Choose the Right Pump
Start from the borewell, not the price list. Three numbers decide the pump: borewell depth, water level and required flow. From these, the total head is calculated, and the right HP and number of stages follow. Our upcoming submersible pump HP guide covers this step by step.
⚠ COMMON BUYING MISTAKES
- Choosing HP without checking total head against the pump curve.
- Comparing a pump-only price with a full-kit price.
- Using undersized cable over long runs, causing voltage drop and motor burn-out.
- Buying online with no local service support for repairs.
- Ignoring the power connection — three-phase pumps need three-phase supply.
8. Buying Checklist
Before you order
Borewell diameter (V3/V4/V6), depth, water level, required flow, power supply (single or three phase).
On the quote
Brand, model, HP, stages, motor type, winding material, what is included (panel, cable length, safety wire), warranty, and whether the price includes GST.
On delivery
Match the model and serial number with the invoice. Keep the warranty card and test report.
Headsup B2B supplies submersible, monoblock and industrial pumps from verified suppliers, with bulk pricing for contractors and credit for verified buyers. See our guide to industrial pump types or explore Pipes and water solutions.
Frequently Asked Questions
Q. What is the price of a 1 HP submersible pump?
Approximately ₹5,000–17,000 including GST, depending on brand tier, stages and accessories. Value brands sit at the lower end and premium brands near the top. Approximate figures only.
Q. What is the price of a 1.5 HP submersible pump?
Approximately ₹6,000–15,000 including GST. Pump-only listings sit lower; kits with a control panel and cable, and dealer V4 pumps, sit higher.
Q. What is the price of a 2 HP submersible pump?
Approximately ₹7,000–22,000 including GST, depending on brand, stages and whether a panel and cable are included.
Q. Why do pumps of the same HP have very different prices?
Stages, motor type, copper winding, body material, brand tier and included accessories all change the price.
Q. Does the pump price include cable and control panel?
Sometimes. Some listings include a panel and 30–60 m of cable; others are pump-only. Compare complete kits with each other.
Q. Which is better, oil-filled or water-filled?
Both work well when sized correctly. Water-filled motors are generally easier to rewind and service; oil-filled motors are often sold as sealed, lower-maintenance units.
Q. How much does a complete borewell pump installation cost?
In an illustrative 300 ft, 1.5 HP case, approximately ₹28,000 including GST — with the pump only around 40% of the total.
Q. Are these prices inclusive of GST?
Yes. All prices in this guide are approximate and include GST. The exact GST amount appears on the supplier’s tax invoice.
Get a Quote for Submersible Pumps
- ✓ Value, regional and premium brands
- ✓ 1 HP to 5 HP+, single and three phase
- ✓ Bulk supply for contractors and projects
- ✓ Credit for verified buyers
Share
