- 01Why 5HP is the most popular solar pump in India
- 025HP solar pump — complete specifications
- 035HP solar pump price in India 2026
- 04Use cases — where 5HP solar pump is best suited
- 055HP solar pump — submersible vs surface
- 06BLDC vs AC motor — which to choose for 5HP
- 07How to source 5HP solar pumps in bulk — B2B guide
- 08Frequently asked questions
Why 5HP Is the Most Popular Solar Pump in India
Of all the solar pump capacities available under government schemes — 3HP, 5HP, 7.5HP, and 10HP — the 5HP consistently accounts for the highest procurement volumes. This is not a coincidence. It is the result of a near-perfect match between 5HP capacity and India's agricultural realities.
| Reason | Why It Matters for B2B Dealers |
|---|---|
| Farm size match | India's average farm holding is 1.08 hectares (2.7 acres). A 5HP pump delivers 200–300 LPH — exactly right for irrigating 2–5 acres efficiently. |
| Subsidy sweet spot | The 5HP benchmark cost of ₹3.5 lakh × 90% subsidy = farmer pays ₹35,000. This price point is affordable for most small and marginal farmers. |
| Highest tender volume | State nodal agencies issue the largest tender quantities in the 5HP category. Rajasthan RRECL tenders typically specify 60–70% of volume as 5HP units. |
| Widest availability | Most manufacturers — Kirloskar, Shakti, CRI, Grundfos — have deepest inventory and fastest delivery for 5HP models. Regional distribution is strongest. |
| Best dealer margin structure | Competitive procurement market for 5HP means manufacturers offer volume discounts faster. Dealers sourcing 100+ units routinely achieve 12–15% margins. |
5HP Solar Pump — Complete Specifications
All 5HP solar pumps supplied under government schemes must meet MNRE-defined specifications. The table below covers every component — use this as a checklist when evaluating supplier quotes or verifying product compliance.
| Motor type | BLDC (Brushless DC) — preferred | AC Induction — alternative |
| Motor power | 3.7 kW / 5 HP |
| Solar panel capacity | 4 kWp to 5.5 kWp |
| Number of panels | 8 to 10 panels @ 550 Wp each |
| Panel type | Mono-PERC or Polycrystalline — BIS CRS certified |
| Water output | 200 to 300 litres per hour |
| Total head | Up to 70 metres (submersible) | Up to 15 metres (surface) |
| Pump type | Submersible or Surface — stainless steel body SS304/SS316 |
| Controller | MPPT-based Variable Frequency Drive (VFD) — IP65 rated |
| Mounting structure | Hot-dip galvanised steel — IS 2062 grade — 15 to 25 degree tilt |
| IP rating | IP68 (motor/pump) | IP65 (controller/enclosure) |
| Operating voltage | DC: 120V–370V | AC: 220V–415V |
| Pump warranty | Minimum 5 years comprehensive |
| Panel warranty | 25-year linear performance | 5-year product warranty |
| AMC | 5-year annual maintenance contract — mandatory for govt projects |
| Certifications | BIS CRS (panels) | IEC 61215 | IS 8034 (submersible) | IS 9079 (surface) |
5HP Solar Pump Price in India 2026
5HP solar pump prices vary based on motor type, panel brand, pump brand, and whether the quote includes installation and AMC. Here is a complete breakdown of what you should expect to pay — and what a complete system should cost.
| Component | Economy Range | Mid-range | Premium Brand | Notes |
|---|---|---|---|---|
| Solar panels (4–5.5 kWp) | ₹60,000–80,000 | ₹80,000–1,10,000 | ₹1,10,000–1,40,000 | Mono-PERC adds 10–15% |
| Pump motor (BLDC 5HP) | ₹35,000–50,000 | ₹50,000–75,000 | ₹75,000–1,00,000 | BLDC costs more than AC |
| MPPT controller / VFD | ₹12,000–18,000 | ₹18,000–30,000 | ₹30,000–45,000 | IP65 rating mandatory |
| Mounting structure | ₹10,000–14,000 | ₹14,000–18,000 | ₹18,000–25,000 | HDG steel — IS 2062 |
| Wiring + junction box | ₹4,000–6,000 | ₹6,000–9,000 | ₹9,000–12,000 | BIS certified cable |
| Installation | ₹6,000–10,000 | ₹10,000–15,000 | ₹15,000–22,000 | Rural sites cost more |
| 5-year AMC | ₹12,000–18,000 | ₹18,000–25,000 | ₹25,000–35,000 | ₹3,000–7,000/year |
| TOTAL SYSTEM COST | ₹1.39–1.96 L | ₹1.96–2.82 L | ₹2.82–3.79 L | MNRE benchmark ~₹3.5L |
Use Cases — Where 5HP Solar Pump Is Best Suited
A 5HP solar pump is not a universal solution — it performs best in specific conditions. Recommending the right capacity builds trust with farmers and reduces after-sale complaints for B2B dealers.
Medium Farm Irrigation
2 to 5 acres. Crops like wheat, rice, sugarcane, vegetables. Primary use case — accounts for 60%+ of 5HP installations.
Orchard and Horticulture
Mango, banana, guava orchards. Drip irrigation compatibility. Higher value crops justify premium system investment.
Livestock Water Supply
Dairy farms with 20–50 cattle. Continuous low-flow requirement. Pairs well with elevated storage tank setup.
Construction Site Dewatering
Foundation pit dewatering, water supply for construction. Temporary use — surface pump type preferred.
Rural Water Supply
Small community water supply schemes. 200–500 households. Submersible type with elevated tank distribution.
Drip Irrigation Integration
Solar pump + drip system reduces water use by 40–50%. Increasingly specified by state horticulture departments.
5HP Solar Pump — Submersible vs Surface
Both submersible and surface variants are available in 5HP capacity. The choice depends entirely on the water source at the installation site — not on price or convenience.
| Parameter | 5HP Submersible Pump | 5HP Surface Pump |
|---|---|---|
| Installation | Inside borewell — submerged in water | Above ground — near water source |
| Water source | Borewell / tube well | Open well, pond, canal, river |
| Depth capability | Up to 70 metres | Water within 8–10 metres of surface |
| Price difference | 15–25% more expensive | Lower cost — simpler mechanism |
| Maintenance | Requires borewell access for servicing | Easier access — above ground |
| Water output | 200–300 LPH at 30–50m head | 200–300 LPH at low head |
| Best suited for | Rajasthan, Gujarat, UP — deep borewells | Bihar, WB, Assam — surface water |
| MNRE preference | Widely accepted in all states | Accepted where applicable |
| Common issue | Sand ingress in shallow borewells | Cavitation in low-water conditions |
BLDC vs AC Motor — Which to Choose for 5HP
The motor type is the single most important technical decision in a 5HP solar pump system. It affects efficiency, panel requirement, price, and maintenance. Here is what every B2B dealer needs to know.
| Parameter | BLDC Motor (5HP) | AC Induction Motor (5HP) |
|---|---|---|
| Full form | Brushless Direct Current | Alternating Current Induction |
| Efficiency | 85–92% — best in class | 75–82% — lower efficiency |
| Panel requirement | 4 kWp sufficient | 4.5–5.5 kWp needed (more panels) |
| Starting current | Smooth soft-start — no surge | High starting current — stress on panels |
| Maintenance | No brushes — minimal wear | Brushes wear — periodic replacement |
| Price premium | 10–20% more expensive than AC | Lower upfront cost |
| Performance in shade | Better — MPPT optimises output | Can stall in partial shade |
| Lifespan | 15–20 years typically | 10–15 years |
| MNRE preference | Preferred in most state tenders | Accepted but less preferred |
| Best for | Government projects, long-term installs | Cost-sensitive private market |
How to Source 5HP Solar Pumps in Bulk — B2B Guide
Bulk sourcing of 5HP solar pumps for government or private projects requires structured procurement — from specification matching to delivery logistics. Here is a step-by-step process that experienced dealers follow.
Define your specification before approaching suppliers
Write a one-page spec sheet based on MNRE requirements: motor type (BLDC), pump type (submersible/surface), head requirement (in metres), certifications required (BIS, IEC, ALMM). Suppliers who receive a clear spec respond with accurate quotes faster.
Get quotes from at least 3 sources
Compare quotes from one premium brand (Kirloskar/Shakti), one mid-range brand (CRI/Lubi), and one regional OEM. Evaluate on: certification validity, delivery timeline, payment terms, warranty scope, and AMC structure — not just headline price.
Verify certifications before committing
Check BIS CRS registration numbers for panels at bis.gov.in. Verify IS 8034 for submersible pumps. IEC test certificates should show the specific model — not just the brand. Expired or fake certifications are common in low-price quotes.
Negotiate AMC terms separately
AMC is a 5-year obligation — structure it as a separate line item in your supply contract. Define: what is covered, response time for breakdowns, replacement part responsibility, and annual service schedule. Vague AMC terms become disputes later.
Plan logistics for rural delivery
5HP pump systems weigh 80–120 kg complete. Rural site delivery requires vehicle accessibility, unloading equipment, and local labour. Factor ₹5,000–15,000 per unit for last-mile delivery in remote areas. Build this into your quote upfront.
Maintain a minimum buffer stock
For dealers active in government tenders, maintain 20–30 units of 5HP pumps as buffer. Nodal agency installation windows are often 30–45 days after order confirmation. Dealers who deliver on time receive priority allocation in the next tender cycle.
Frequently Asked Questions — 5HP Solar Pump
What is the price of a 5HP solar pump in India 2026?+
A complete 5HP solar pump system costs ₹3 lakh to ₹4 lakh before subsidy. After government subsidy of 60% (central) + 30% (state), the farmer pays approximately ₹30,000 to ₹40,000. The MNRE benchmark cost for 5HP is approximately ₹3.5 lakh.
How many solar panels are needed for a 5HP solar pump?+
A 5HP solar pump requires 4 kWp to 5.5 kWp of solar panels — typically 8 to 10 panels of 550 Wp each. BLDC motor pumps need fewer panels (4 kWp) due to higher efficiency. AC motor pumps need more panels (5–5.5 kWp) to deliver the same output.
What is the water output of a 5HP solar pump?+
A 5HP solar pump delivers 200 to 300 litres per hour at a head of 30 to 50 metres. Output varies with sunlight intensity — peak output occurs between 10 AM and 3 PM. Over a full sunny day of 6–7 peak hours, total output is 1,200 to 2,100 litres.
Is BLDC or AC motor better for 5HP solar pump?+
BLDC is better for most applications — higher efficiency (85–92% vs 75–82%), lower panel requirement, no brushes to replace, and longer lifespan. For government projects, BLDC is increasingly mandatory. AC motor is only preferred when upfront cost is the primary constraint and the buyer understands the efficiency trade-off.
What is the lifespan of a 5HP solar pump?+
A well-maintained 5HP solar pump system has a lifespan of 20–25 years (solar panels), 10–15 years (pump motor with regular servicing), and 8–12 years (MPPT controller). The 5-year mandatory AMC covers the highest-risk period for component failures.
How deep can a 5HP submersible solar pump go?+
A standard 5HP submersible solar pump is rated for depths up to 70 metres. For deeper borewells (70–120 metres), a higher HP rating or a specialised deep-well pump is required. Always specify the actual borewell depth when ordering — under-rated pumps fail quickly in deep installations.
Source 5HP Solar Pumps in Bulk — Headsup B2B
We help B2B dealers and contractors source BIS-certified 5HP solar pumps — BLDC and AC, submersible and surface — at competitive bulk prices across India.
1000+ verified suppliers · Pan-India delivery · Procurement support
